Which kind of job can do by this 3D dynamic fiber laser with XY moving table?
✓ Deep engrave mold cavities with uniform depth on curved and slanted surfaces
✓ Mark large mold plates without manual repositioning — XY servo table does the work
✓ Apply fine textures (matte, leather, sandblast) on injection mold surfaces
✓ Compatible with steel, hardened tool steel, copper, aluminum, and titanium
✓ CE-certified. Factory-tested. Ships globally with full after-sales support
✓ Mark large mold plates without manual repositioning — XY servo table does the work
✓ Apply fine textures (matte, leather, sandblast) on injection mold surfaces
✓ Compatible with steel, hardened tool steel, copper, aluminum, and titanium
✓ CE-certified. Factory-tested. Ships globally with full after-sales support
Application of JPT MOPA Laser marking machine
|
Application
|
Description
|
Examples
|
|
Mold Deep Engraving
|
Engraves IDs and logos into hardened steel, even on curved walls.
|
P20, H13, S136 mold cores/inserts
|
|
Surface Texture Patterning
|
Applies micro-textures (matte, leather, etc.) for aesthetics.
|
Plastic injection mold cavities
|
|
Curved Surface Engraving
|
Real-time dynamic focus for uniform depth on 3D contours.
|
Die faces, curved mold inserts
|
|
Large-Area Marking
|
Seamless marking on large plates without visible seams.
|
600×600 mm+ steel mold plates
|
|
Serial Number & Traceability
|
Permanent marking of codes and barcodes; no consumables.
|
Automotive and aerospace parts
|
3D dynamic laser vs standard 2D fiber laser — which do you need?
| Capability | HT-3D Pro (3D Dynamic) | Standard 2D Fiber Laser |
| Curved surface engraving | ✅ Real-time Z-axis focus correction, depth stays uniform | ❌ Focus drifts on curves, uneven or blurry results |
| Large-area marking (>300×300 mm) | ✅ XY servo table extends range to 600×600 mm+ | ❌ Limited to galvo field; manual repositioning required |
| Deep mold engraving (>0.3 mm) | ✅ Multi-pass with auto Z-compensation as depth increases | ⚠️ Possible, but depth uniformity degrades without Z control |
| Flat surface marking (logos, barcodes, serial numbers) | ✅ Full capability | ✅ Full capability — 2D is sufficient for flat work |
| Surface texture on cavity walls | ✅ Applies to vertical and angled walls with uniform Ra | ❌ Not suitable for non-horizontal surfaces |
| Setup complexity | Moderate — 3D surface file import required | Simple — 2D vector or bitmap import |
Recommended machine configuration (for mold engraving)
|
Component
|
Specification
|
Notes
|
|
Laser source
|
JPT 100W fiber laser (MOPA recommended)
|
MOPA offers adjustable pulse width (2–500 ns) for finer texture control and reduced heat on hardened steel. Available 50W–500W.
|
|
3D galvo head
|
3-axis dynamic focus, high-speed scan
|
Maintains focal depth on curved and uneven surfaces in real time. Z-axis range: ±30 mm typical.
|
|
XY moving table
|
Servo-driven, 400×400 mm stroke
|
0.01 mm positioning repeatability. Enables seamless marking on mold plates larger than the galvo field.
|
|
Controller and software
|
Lenmark3D + Lenmark3DS
|
Supports 3D surface import (STL/point cloud), XY servo stitching, rotary axis, and layer-by-layer deep engraving control.
|
|
Z-axis
|
Motorized lift table or autofocus
|
Recommended for heavy molds (>50 kg). Manual Z available as entry option.
|
|
Rotary axis
|
Optional — 100 mm or 125 mm chuck
|
For engraving round mold inserts and cylindrical metal parts. Coordinate-wrapping handled by Lenmark3DS.
|
|
Worktable base
|
Heavy-duty cast iron or granite surface plate
|
Vibration-resistant base is critical for consistent engraving depth during multi-pass deep engraving. Granite recommended for highest precision.
|
|
Cooling system
|
Air-cooled (standard at 100W)
|
Water cooling is required for 200W and above configurations. Industrial chiller recommended for continuous production environments.
|
|
Power supply
|
220V single-phase, 50/60 Hz, ~4 kW
|
Standard industrial supply. Three-phase available for high-power configurations.
|
|
Certification
|
CE, FDA 21 CFR 1040.10, ISO 9001
|
Cleared for export to EU, US, and international markets. Full documentation included.
|
|
Compatible materials
|
Steel, stainless steel, hardened tool steel (P20/H13/S136), copper, aluminum, titanium, brass, gold, silver
|
MOPA variant recommended for copper and aluminum to minimize burr and oxide discoloration.
|
Key Advantge of HITEC 3D LASER
►Deep engraving with uniform depth on curved surfaces — 3D dynamic focus compensates for surface variation in real time, eliminating the defocus blur that occurs with 2D lasers on non-flat geometry.
► Mark large mold plates without manual repositioning — the servo XY table stitches multiple galvo passes into a seamless marking field, covering 600×600 mm or larger with 0.01 mm accuracy between sections.
► Stable engraving on heavy metal workpieces — the cast iron or granite base eliminates vibration-induced depth variation, which is critical for repeatable deep engraving across multi-pass jobs.
► Precision texture and pattern replication — leather, matte, sandblast, and custom geometric textures are reproduced with consistent Ra values across the full cavity surface, including angled and curved walls.
► Permanent, consumable-free marking — serial numbers, barcodes, and logos engraved into hardened steel are permanent and chemical-resistant, with no inks, labels, or coatings required.
► CE and FDA certified, ships globally — factory-tested before dispatch, full export documentation provided, remote installation support included as standard.
► Mark large mold plates without manual repositioning — the servo XY table stitches multiple galvo passes into a seamless marking field, covering 600×600 mm or larger with 0.01 mm accuracy between sections.
► Stable engraving on heavy metal workpieces — the cast iron or granite base eliminates vibration-induced depth variation, which is critical for repeatable deep engraving across multi-pass jobs.
► Precision texture and pattern replication — leather, matte, sandblast, and custom geometric textures are reproduced with consistent Ra values across the full cavity surface, including angled and curved walls.
► Permanent, consumable-free marking — serial numbers, barcodes, and logos engraved into hardened steel are permanent and chemical-resistant, with no inks, labels, or coatings required.
► CE and FDA certified, ships globally — factory-tested before dispatch, full export documentation provided, remote installation support included as standard.
Mold Deep Engraving Results
Real samples produced on the HT-3D Pro. All work performed on hardened mold steel using the 100W JPT fiber source and 3D dynamic focus galvo head.
Frequently Asked Questions
3D Fiber Laser Marking Machine — FAQ
Common questions from buyers in the mold-making and metal-parts industries.
What is a 3D dynamic fiber laser marking machine?▾
Pls check this details : https://www.hiteccnc.com/Latest-News/show-50-120-1.html
What is the XY slide table used for on a laser marking machine?
The XY slide table on a laser marking machine solves one fundamental problem: the galvo scan field is limited in size (typically 110×110 mm to 300×300 mm), but many workpieces — especially large mold plates — are much bigger than that.
What it does The XY slide table is a servo-motor-driven platform that moves the workpiece in precise X and Y increments underneath the fixed laser head. When the galvo finishes marking one section, the table shifts the workpiece to the next position, and the laser marks again — repeating until the entire surface is covered.
The result is seamless large-area marking with no visible seam or misalignment, even across a 600mm&600mm or larger mold plate.
What it does The XY slide table is a servo-motor-driven platform that moves the workpiece in precise X and Y increments underneath the fixed laser head. When the galvo finishes marking one section, the table shifts the workpiece to the next position, and the laser marks again — repeating until the entire surface is covered.
The result is seamless large-area marking with no visible seam or misalignment, even across a 600mm&600mm or larger mold plate.
What metals can the JPT 100W fiber laser engrave?
Carbon steel, stainless steel, gold, sliver, brass, Titanium Steel
What software does the HT-3D Pro use
Lenmark3d+Lenmark3DS
Is the HT-3D Pro CE and FDA certified?
Yes. The HT-3D Pro carries CE (European Conformity) certification, clearing it for import and use within the European Union. It complies with FDA 21 CFR 1040.10 laser product safety regulations for the US market and is manufactured under ISO 9001 quality management. All export documentation — commercial invoice, packing list, CE declaration of conformity, and HS code declaration — is prepared by HITEC for each shipment.What after-sales support and warranty does HITEC provide?
HITEC provides a 2-year warranty on the machine frame, XY table, and control system, and a 1-year warranty on the JPT laser source (in line with JPT's own factory warranty). After-sales support includes 24-hour response via WhatsApp and email, remote diagnosis via TeamViewer, replacement parts dispatched within 3 working days for common wear items (scan mirrors, F-theta lenses, protective glass), and free software updates for the Lenmark platform. HITEC has served customers in over 60 countries and maintains spare parts stock for all current machine models.
Tag: 3d fiber laser 3d dynamic fiber laser laser marking machine laser machine with xy table
